Quality Groundwork

All guides

What is a Gauge R&R, and when will a customer ask for one?

Measure the same part twice and you will rarely get exactly the same number. A Gauge R&R study tells you how much of the variation in your numbers comes from the measuring, and how much from the parts.

What the two Rs mean

  • Repeatability is the variation when the same person measures the same part with the same gauge several times.
  • Reproducibility is the variation between different people measuring the same parts with the same gauge.

How it differs from calibration

Calibration compares a gauge with a known standard and checks accuracy. Gauge R&R tests the whole measurement as it is really done: your gauge, your people, your method. A calibrated gauge can still give a poor Gauge R&R result if people use it differently.

When a customer asks for one

Usually when they buy to a measured specification and need to trust the numbers you report, or as part of approving a new item. Some customers set their own limits, so ask what they expect.

How a simple study runs

  • Choose about 10 parts that cover the normal range of your process.
  • Have 3 people who normally do the measurement measure every part, 2 or 3 times each.
  • Hide the part numbers and change the order each round, so nobody repeats a number from memory.
  • Enter the readings in a study worksheet, which works out the result.

Reading the result

A common guideline: under 10 percent of the variation coming from measurement is good, 10 to 30 percent may be acceptable depending on the feature, and over 30 percent is not acceptable.

If the result is poor

Look at which R is larger. Poor repeatability usually points to the gauge or how the part is held. Poor reproducibility usually points to the method: people measuring in different places or with different pressure.

Courses on this topic

Start with the free course. Introduction to Plant Quality takes about 40 minutes and ends with a dated certificate of training.

Start the free course